©Copyright 2006 Marvell®.
All rights reserved.
SetupYukonWin_5X6E.htm created 28-Nov-2006
Readme File for SETUPYUKONWIN_5X6E.exe v9.12.4.3
Supporting: Marvell Yukon Ethernet Controller
This package contains the following software components:
- NDIS5 Miniport Driver version 8.61.3.3 for Windows 2000
- NDIS5.1 Miniport Driver version 8.61.3.3 for Windows XP/Server 2003 (32 bit)
- NDIS6 Miniport Driver version 9.12.4.3 for Windows Vista (32 bit)
This file contains
The driver installation package contains the Marvell NDIS Miniport Driver
for the Marvell Yukon Ethernet Controller.
This README file explains how to install the driver installation package on
a machine running one of the following operating systems:
Windows 2000, Windows XP, Windows Server 2003 (x86), Windows Vista
To install the driver, the following file is required:
SetupYukonWin_5X6E.exe
On plug & play Windows versions the adapter is found, identified and
configured automatically. Cancel all operating system attempts to install
the driver automatically.
NOTE: To install the driver you have to be logged in as
a user with administrative rights.
To install the driver, proceed as follows:
1. Execute the setup file "SetupYukonWin_5X6E.exe".
2. Follow the instructions displayed during the
installation procedure.
In order to install the driver silently the following commands should be
executed.
4.1 Driver Installation
SetupYukonWin_5X6E.exe /S /V"/LIME %WINDIR%\YukonInstall.log
REBOOT=ReallySuppress /qn"
4.2 Driver Removal
SetupYukonWin_5X6E.exe /S /V"/LIME %WINDIR%\YukonInstall.log REMOVE=ALL
REBOOT=ReallySuppress /qn"
4.3 Driver Repair
SetupYukonWin_5X6E.exe /S /V"/LIME %WINDIR%\YukonInstall.log
REINSTALLMODE=vomus REINSTALL=ALL REBOOT=ReallySuppress /qn"
NOTE: On Windows 98 SE and Windows Me it is recommended
to use "REBOOT=Force" instead of
"REBOOT=ReallySupress" because each driver
installation needs a reboot for completion.
4.4 Further Options
By default the installation directory is "%PROGRAMFILES%\Marvell\Miniport
Driver". It can be changed by setting the variable "INSTALLDIR".
Example :
SetupYukonWin_5X6E.exe /S /V"/LIME %WINDIR%\YukonInstall.log
INSTALLDIR=C:\MyDir REBOOT=ReallySuppress /qn"
The installation status is logged in the file "%WINDIR%\YukonInstall.log".
The log file path and name can be changed by replacing
"%WINDIR%\YukonInstall.log" with the preferred file path and name.
If you should encounter any problems with your driver installation package,
please re-read the instructions above and the documentation supplied with
the operating system carefully.
Additionally refer to your system event log file (using the Event Viewer)
and check it for entries from the Marvell NDIS Miniport Driver. If your
particular problem is not listed or the error persists, please send your
system event log file to our technical support.
For further information please contact our support.
*** End of Readme File ***